Swirl flow meters can be utilized for highly accurate measurement of the flow of gases, liquids and steam over a wide range of temperatures in almost any application.
Swirl meters are ideal for use on petrochemical raw materials, demineralized water, low viscose liquids and for direct, cost-effective steam mass flow by employing integral temperature measurement.
SwirlMaster FSS430 is the basic swirl meter for your volume flow applications. It uses a two-wire transmitter with leading edge DSP-Technology with excellent vibration compensation and enables user friendly intuitive operation directly through the glass
When installation space is limited, the SwirlMaster FSS430 provides flexibility in installation, due to low required inlet and outlet sections, and can save up to 75% straight pipe run costs and enable installations in almost impossible situations.
Multiple Communication Protocols
SwirlMaster FSS430 is available with multiple communication protocols, such as:- 4 to 20mA / HART 7
- Modbus TCP and Profinet via Ethernet -APL
- Modbus RTU
Options
- Smart HMI with backlight and Bluetooth functionality for easy meter setup (Ethernet-APL device only)
- Integrated RTD for temperature compensation and saturated steam mass flow calculation
- Digital outputs for pulses, frequency, and alarm signalization
- Remote transmitter with up to 30m (98 ft.) cable length
- Stainless steel transmitter housings
FSS430
ABB FSS430
with remote display
Features
- Accurate: ± 0.50% of rate
- 0.5 to 12 inch pipe
- Low Upstream and downstream requirements
- Integral sensor supervision for highest process reliability
- Display with through the glass operation with closed cover
- integral version or remote design
- Hot pluggable display unit with through the glass (TTG) operation
- Optional digital output for pulse or frequency
- Optional integral temperature compensation
Documentation
General Specifications
- Easy assembly – Only the shortest possible straight pipe lengths are required
- Easy Set-up function – Clear text display
- Accuracy for liquids, gases and steam – +/- 0.5 % of rate
- Process connection / meter sizes – Flange design / DN 15 to 400 (1/2 to 16 in.)
- Approvals for explosion protection – ATEX, IECEx, cFMus, NEPSI
- SIL2-certified in accordance with IEC 61508
- Output / communication – 4 to 20 mA / HART 7
- Optional binary output – For use as a limit switch, pulse output or frequency output
- Optional input from field – Pressure, temperature, methane content, density gas analyzer
– Measuring ranges have been well adopted to the flow rates Intuitive operation
– Meter configuration through the front glass with closed cover
– Bluetooth functionality (Smart HMI only) for My Device Manager App
– Modbus TCP
Profinet
Webserver via Ethernet-APL
– Modbus RTU-RS485
