Home > Wika > Electronic Pressure Transmitters > P/I pressure to current converters |
||
|
WIKA - P/I - Pneumatic (3-15 psi) to Current (4-20) ma signal converters |
|
Most of the Wika's pressure transmitters can be special ordered with a 3-15 psi input signal to convert pneumatic signals into 4-20 ma. These are available for general purpose, hazardous and sanitary conditions. |
Industrial Pressure Transmitters |
||
---|---|---|
![]() |
Wika Model A-10 General Industrial Pressure TransmitterThe Wika Model A-10 is a lower cost electronic pressure transmitter designed to fit many industrial and OEM pressure measurement application...More |
Data Sheet |
![]() |
Wika Model S-10 General Industrial Pressure TransmitterCompact, rugged design makes these transmitters suitable for hydraulics and pneumatics; pumps and systems; and liquid level measurement applications...More |
DataSheet |
![]() |
Wika Model F-20The Wika Model F-20 electronic pressure transmitter with NEMA 4X Integral Junction Box More |
Data Sheet |
Hazardous Pressure Transmitters |
||
![]() |
Model E-10 Hazardous Area Explosion-proof Pressure TransmitterThe Wika Model E-10 explosion-proof pressure transmitter is specifically designed to meet the durability and performance requirements of oil & gas pressure monitoring applications. |
Data Sheet |
![]() |
Model E-11The Wika Model E-11 electronic pressure transmitter is similar to the E-10, but features a flush diaphragm process connection. |
Data Sheet |
![]() |
Model IS-20 Intrinsically safe pressure transmitter for hazardous areasIntrinsically safe pressure transmitter for hazardous areas. These pressure transmitters have been specifically designed for the highest industrial requirements and feature the relevant worldwide approvals of ATEX, FM, CSA and a SIL rating.for IS Applications |
Data Sheet |
![]() |
Model IS-21 IS Pressure Transmitter with Flush diaphragmSimilar to the Wika Model IS-20 electronic pressure transmitter but with with non-clogging flat diaphragm and cable gland |
Data Sheet |
![]() |
Model N-10 Non-incentive Pressure Transmitter with NACE ComplianceThe Wika Model N-10 electronic pressure transmitter is designed to meet the durability and performance requirements of gas compressor systems. NACE MR-01-75 compliance provides extra resistance against sulfide stress cracking when exposed to gases containing sulfur. |
Data Sheet |
![]() |
Model N-11 Non-incentive Pressure Transmitter with a Flush Diaphragm and NACE ComplianceThe Wika Model N-11 electronic pressure transmitter feature a flat, non-clogging diaphragm. This is designed for use with viscous fluids or media containing particulates that could clog the pressure port of the standard NPT version. |
Data Sheet |
3A Sanitary Pressure Transmitters |
||
![]() |
Model SA-10-3A Sanitary Pressure TransmitterWIKA S-10-3A pressure transmitters are in compliance with 3A 3rd party
sanitary criteria for pressure and level |
Data Sheet |
![]() |
Model F-20-3A Sanitary Pressure Transmitter with NEMA 4X Integral Junction BoxWIKA F-20-3A pressure transmitters are in compliance with “3A” third party criteria for pressure and level measurement in all sanitary applications. The process wetted surfaces of 316L SS are electropolished to reduce cleaning time. |
Data Sheet |