0.33% of full scale
To 100 psig
0.2% of full scale
16" through one pointer revolution.
element volume: 2.5 cc for the range 0-10 water; 2.0 cc for all other
connection: 1/8" female NPT with built-in SS filter. Connection
located on bottom of case.
pressure: Cases are open to atmosphere.
construction: Cast, anodized aluminum with a high-strength,
scratch-resistant plastic dial cover. Flush mounted by three screws
through the bezel.
adjustment: A zero adjustment is accessible through the front of the
exposed to measured gas: Beryllium copper, brass, soft solder in
ranges to 100 water; silver and soft solder in ranges above 100 water.
Calibration in most metric units available at no extra cost. Other
calibration units and two sets of graduations on the same dial are
available at extra cost. Also available installed in a compact,
suitcase-type carrying case with a shock-mounted panel for the gauge. The
cover is easily removed and connections can be made without removing the
gauge from the case.