7" through one pointer revolution
0.33% of full scale
0.2% of full scale
element volume: 2.5 cc for the range 0-10 water; 2.0 cc for all other
pressure: 150 psig
leak rate: Will not exceed 0.64 x 10-5 std cc/sec or 0.0018 psi/hr
connection: 1/8" female NPT pressure and static connections. Each has
a built-in stainless steel filter and is located on the back of the case.
construction: Anodized aluminum with tempered-glass dial cover. Flush
mounted by four screws through bezel.
exposed to measured gas:
element: beryllium copper, brass, soft solder in ranges to 100
water; silver and soft solder in ranges above 100 water.
aluminum, beryllium copper, brass, stainless steel, nylon, ethylene
propylene rubber, Monel, soft solder, synthetic sapphire, white paint,
drawing ink, Duco lacquer. Ranges above 100 water have silver solder
Calibration in most metric units is available at no extra cost. Other
units of calibration are available at extra cost.