BSI Controls (Buck Sales Inc.)
Home  | Products  | Manufacturers  | Applications Literature  | Contact  | Search

The manufacturing of these  precision pressure gauges and calibrators has been relocated from Germany and are now being done in the U.S. by WIKA Instrument Corporation. They are certified to NIST Standards before shipment. The Certificate of Calibration is included at no additional cost

Series 300 2 " Dial High Precision Absolute Pressure Gauges

For routine test, laboratory, and production uses, this gauge gives accuracy and compact size. Its mechanism is sensitive yet rugged. And it offers high accuracy at low cost. Available in ten standard ranges, the Series 300 is convenient to use. Absolute pressure is applied to the case and readout is direct, without barometric or temperature corrections. Readings are referenced to zero absolute.

STANDARD FEATURES

Size: 2 " dial

Scale length: 7" through one pointer revolution

Range: To 100 psia

Accuracy: 0.33% of full scale

Sensitivity: 0.2% of full scale

Case pressure and volume: 150 psig, maximum, and 179 cc

Maximum case leak rate: Will not exceed 0.645 x 10-5 std cc/sec or 0.0019 psi/hr.

Case connection: 1/8" female NPT with built-in stainless steel filter.

Case construction: Anodized aluminum with tempered-glass dial

covers. Flush mounted by four mounted screws through the bezel.

STANDARD RANGES AND ORDERING NUMBERS

Series 300- 2" High Precision Gauge

Range & Calibration Ordering Number Graduation
0-50 mm Hg 61D-1D-0050 0.5 mm
0-100 mm Hg 61D-1D-0100 1.0 mm

0-200 mm Hg

61D-1D-0200

2.0 mm

0-410 mm Hg 61D-1D-0410 5.0 mm
0-800 mm Hg 61D-1D-0800 10.0 mm
390-800 mm Hg 61D-1D-0390 5.0 mm
0-15 psia 61D-1A-0015 0.2 psia
0-30 psia 61D-1A-0030 0.5 psia
0-60 psia 61D-1A-0060 1.0 psia
0-100 psia 61D-1A-0100 1.0 psia

download the full datasheet

(PDF format)

 

Request a Quote
 

Company & Contact Information
Privacy Policy