Loop-Powered Stud Mount Vibration
4-20ma Transmitter Model 570B
Robertshaw’s model 570B is a loop powered
(12 – 36 VDC) vibration transmitter that provides a 4-20 mADC output
proportionate to vibration. The transmitter is available with a variety of
acceleration and velocity ranges. This rugged (316L Stainless Steel, NEMA
4X, IP68) compact unit provides continuous monitoring of machine vibration
for trending, alarm and/or shutdown when used with a PLC, computer, DCS,
data logger or current relays.
Installation is simple and no calibration is required. A
1/4-28 tapped hole and a 1/4-28 stud is provided for mounting. The unit
has a 2 pin connector and mates with a standard MIL-C-5015 2 socket
connector with splashproof boot for a weatherproof, splash-proof
connection. Optional cable assemblies are available in lengths of 16, 32,
64 and 112 feet.
Features & Benefits
• Two wire
loop powered (12 – 36 VDC)
• 4 – 20 mADC
output (isolated)
• Compact
design, 1.12” diameter, 2.80” height
• Corrosion
resistant (316L Stainless Steel)
• NEMA 4X,
IP68, hermetically sealed enclosure
• ESD and EMI
protection
• Overload
protection
• Reverse
wiring protection
• Available
for either acceleration or velocity measurement
Robertshaw’s model 570B is a loop powered
(12 – 36 VDC) vibration transmitter that provides a 4-20 mADC output
proportionate to vibration. The transmitter is available with a variety of
acceleration and velocity ranges. This rugged (316L Stainless Steel, NEMA
4X, IP68) compact unit provides continuous monitoring of machine vibration
for trending, alarm and/or shutdown when used with a PLC, computer, DCS,
data logger or current relays.
