STANDARD FEATURES
Accuracy:
0.33% of full scale
Ranges:
To 100 psig
Sensitivity:
0.2% of full scale
Scale length:
16" through one pointer revolution.
Dial
diameter: 6"
Pressure
element volume: 2.5 cc for the range 0-10” water; 2.0 cc for all other
ranges.
Case
connection: 1/8" female NPT with built-in SS filter. Connection
located on bottom of case.
Case
pressure: Cases are open to atmosphere.
Case
construction: Cast, anodized aluminum with a high-strength,
scratch-resistant plastic dial cover. Flush mounted by three screws
through the bezel.
Zero
adjustment: A zero adjustment is accessible through the front of the
case.
Material
exposed to measured gas: Beryllium copper, brass, soft solder in
ranges to 100” water; silver and soft solder in ranges above 100” water.
Options:
Calibration in most metric units available at no extra cost. Other
calibration units and two sets of graduations on the same dial are
available at extra cost. Also available installed in a compact,
suitcase-type carrying case with a shock-mounted panel for the gauge. The
cover is easily removed and connections can be made without removing the
gauge from the case.
