STANDARD FEATURES
Size: 2
¾" dial
Scale Length:
7" through one pointer revolution
Range: To
100 psi
Accuracy:
0.33% of full scale
Sensitivity:
0.2% of full scale
Pressure
element volume: 2.5 cc for the range 0-10” water; 2.0 cc for all other
ranges
Case volume:
179 cc
Maximum case
pressure: 150 psig
Maximum case
leak rate: Will not exceed 0.64 x 10-5 std cc/sec or 0.0018 psi/hr
Case
connection: 1/8" female NPT pressure and static connections. Each has
a built-in stainless steel filter and is located on the back of the case.
Case
construction: Anodized aluminum with tempered-glass dial cover. Flush
mounted by four screws through bezel.
Materials
exposed to measured gas:
Pressure
element: beryllium copper, brass, soft solder in ranges to 100”
water; silver and soft solder in ranges above 100” water.
Case:
aluminum, beryllium copper, brass, stainless steel, nylon, ethylene
propylene rubber, Monel, soft solder, synthetic sapphire, white paint,
drawing ink, Duco lacquer. Ranges above 100” water have silver solder
also.
Options:
Calibration in most metric units is available at no extra cost. Other
units of calibration are available at extra cost.
