Reduced Options. Please see Specifications

Wallace & Tiernan Metal Tube Rotameter

Available in a variety of tube sizes (1/2, 3/4, 1, 1-1/2 and 2 inches) and flange facings and ratings, these metal-tube rotameters give reliable flow measurement over a 10:1 range for aggressive fluids at high temperatures and pressures. (See Data Sheet for pressure and temperature limits.) Metering accuracy is 2% of full scale (1% with custom calibration).

Available options include a 4-20 mA output flow signal and high/low alarm switch. Flanges available have ANSI 150-, 300-, and 600- lb. ratings. Flanges are raised, flat, large female, tongue-and groove, or ring-joint face. The standard tube-and-float material is 316 stainless steel. A Hastelloy C float is also available. The magnetic indicator has a 6-inch scale. Percent of maximum flow is the standard calibration; gpm water, scfm air, or special graduations are optional.

NON-FOULING FLOAT
The extra-long float magnet has reduced flux density and is located above the metering disk. This discourages accumulation of magnetic particles, especially on the disk edge where they can cause errors in indication and calibration drift.

NO FLOAT EXTENSIONS
When the float is at rest, nothing projects beyond the flanges. Spool pieces are not required for installation, eliminating a frequent cause of damage when removing meters from a line.

GAS MEASUREMENT TO 0 PSIG
A unique dry snubber is standard on this Varea-Meter used for gas service. It stabilizes the float, gives reliable indication down to atmospheric pressure. It eliminates dashpots, offset piping, and horizontal connections.

RELIABLE MAGNETIC COUPLING
Almost frictionless rotation of the instrument magnet and its powerful bond with the float magnet give a dependable magnetic coupling. A metal shield shunts stray magnetic fields around the coupling.

TRANSMITTER AVAILABLE
A 4-20 mA transmitter is available to provide remote indication of flow rate.