This inexpensive, 5% accuracy flow meter gives reliable flow indication of aggressive fluids at high temperatures and pressures. (See page 2 for  pressure and temperature limits.) Available options include a 4 - 20 mA output flow signal and high/low alarm switch. Meter sizes (pipe connections) are 1/2, 1, 1-1/2, and 2 inches with capacities to 130 gpm water and 150scfm air at STP. Operating range is 10:1. Mounting is vertical in the line with NPT female connections. The magnetically coupled indicating unit has a 6-inch scale calibrated 0 to 100%. A reversible scale with gpm water on one side and percent of maximum flow on the other is standard. Special scale calibrations are optional. All wetted parts are stainless steel (except polypropylene float in gas service); Buna-N, Viton or EPR O-rings. The float has an encapsulated alnico magnet.

TRANSMITTER AVAILABLE
An optional 4-20mA transmitter is available to provide remote indication of flow rate.

FLOW SWITCH AVAILABLE
This optional magnetically coupled switch gives reliable high and/or low switching. It is easily set to open or close on increasing or decreasing flow. Available in a general purpose or a UL listed hazardous-location arrangement.

HIGHER CAPACITIES
Size for size, this meter gives higher capacities; the tapered float design passes volumes of fluids often double that of other designs.