Compact single point flow monitor, MIN or MAX monitoring options, suitable
for water, oil, air or media with similar thermal conductivities. With
screw-in or plug-in type monitoring head for ease of installation
and correct positioning. If the flow rate falls below (MIN) or exceeds
(MAX) the pre-adjusted value, the signal output will be switched and the
yellow LED will light.
Single point flow monitors with change over MIN/MAX monitoring function,
suitable for water, oil, air, and media with similar thermal
conductivities (selectable by means of a medium switch). With either no
delay, or with a 60 s switch-on delay or 10 s change over delay.
Single point flow monitor (SU 1003), dual point flow monitor (SU 1004),
with change over MIN/MAX monitoring function, suitable for water, oil, air
and media with similar thermal conductivities. With either no delay, or
with a 60 seconds switch on delay or 10 seconds change over delay (SU
1003).
Single point flow monitors with change over MIN/MAX monitoring function,
suitable for water, oil, air, and media with similar thermal
conductivities (selectable by means of a medium switch). With either no
delay, or with a 60 s switch-on delay or 10 s change over delay.
The Miniature Flow Monitor SW 112 operates on the proven calorimetric
principle and is designed to operate with air or inert gases.
Self-contained sensor head with integral electronic circuitry.
