 |
Indicators/Transmitters
|
Expert Series
|
 |
LCp-104 Process Weighing System
Patented technology provides ultra-high resolution with precise
repeatability for quality critical weighing applications. |
 |
DXp-40 Weight Transmitter
Precision weight measurement with continuous system diagnostics.
Degrade mode allows continued operation if cell(s) fail. |
 |
LCp-100 Weight Indicator
High performance weight
indicator with Plug-n-Weigh® quick calibration technology, and Dynamic
Digital Filtering. |
 |
LCp-200 Rate-by-Weight Indicator
All the same great features of the LCp-100 plus eight process
setpoints and Mass Flow measurement (rate-by-weight). |
 |
LCp-400 LAN Controller
Multi-scale local area network
controller and communication gateway for up to 16 independent weighing
systems. |
 |
DXp-10/15 Weight Transmitter
Easy-Weigh Transmitters with
integral summing junction circuitry for up to 4 load cells/weigh modules. |
 |
LCm-200 Weight Controller
Class III and Class IIIHD
scale system units meet NIST Handbook 44 (NTEP) and Canadian Weights and
Measures legal-for-trade requirements. |
 |
LCc-II
Load Cell Calibrator
Multi-channel load cell
calibration instrument with front panel "Hot Key" data access. |
Professional Series
|
 |
PS-2010W DIN Rail Mount Indicator
The Model PS-2010W offers high performance for applications that
require a small, simple, full function weight transmitter and controller.
Packaged much like a mini-PLC ‘brick’, the PS-2010W can be DIN rail
mounted inside an existing cabinet. The standard RS-485 serial port
interfaces easily with PLC/DCS systems using conventional ASCII protocol.
A 16 bit resolution 4-20 mA analog current output is available. |
 |
PS-1050 Panel Mount
Indicator
PS-1050 Digital/Analog Weight
Transmitters provide signal conditioning, amplification, and a
corresponding digital or isolated analog output signal for tank/bin/hopper
weighing systems. Front panel configuration and calibration streamlines
system installation and operation. |
 |
PS-1045 DIN Rail
Display Indicator
PS-1045 Digital/Analog
Transmitters provide signal conditioning, amplification, and a
corresponding digital or isolated analog output signal for tank/bin/hopper
weighing systems. Front panel configuration and calibration streamlines
system installation and operation. |
 |
PS-1040 DIN Rail
Blind Indicator
PS-1040 Digital/Analog
Transmitters provide all the features and benefits of the PS1045 without
the display indicator. Configuration is accomplished using PC based
PRO-View software. |
 |
PS-1020 Analog Weight
Transmitter
Self-contained load cell
signal conditioner designed around a precision analog instrument
amplifier. Units are 24 Vdc powered and provide a well regulated
excitation supply for up to four 350 ohm bridge load cells. Configuration
is accomplished using DIP switches and trim pots. |
 |
PS-121 Power Supply
PS-121 Modules supply 24 VDC
power for PS series transmitters. Each module is capable of powering a
single PS Transmitter with six transducers or two PS Transmitters with
four transducers. Units ship with a spare fuse. |
